Blog
Blog
Straight, dated posts that unpack the ideas behind APR Control and capacity modulation, written to answer the questions buyers actually ask.
Dated posts in topic clusters that support the pillars. Every post links back to the authoritative page on its topic, so the blog feeds the site rather than duplicating it.
Oversizing
Why oversized DX equipment short cycles
The design-day trap and what part-load operation actually looks like.
Cost
Retrofit vs. replace: the cost math
Why a $10,000 to $50,000+ installed unit replacement is often avoidable with a retrofit.
Refrigerants
What the A2L transition means for your installed base
R-410A, R-454B, and R-32, and why retrofit buys you time.
Comparisons
APR Control is not hot gas bypass
Continuous capacity modulation versus false-loading.
Heat pumps
Why cold-climate heat pumps are oversized for cooling
Sized for heating, oversized for summer, and how modulation helps.
Humidity
How runtime, not just temperature, controls humidity
Why longer part-load cycles hold moisture down.
Want a topic covered?
Tell us the topic you want covered, or the equipment you are sizing. Either way a real engineer responds within one business day.
Get Expert Help[email protected] · 800‑727‑6447 · rawal.com